SMT4002ALP 产品图

产品详情

SMT4002ALP

中晶新源 SineSemi核心代理商

中低压 MOSFETPDFN5060-8L
规格书下载

参数规格

封装
PDFN5060-8L
结构
N
漏源电压 VDS
40 V
漏极电流 ID
170 A
导通电阻 RDS(ON)@10V 最大
2 mΩ
车规 (Y/N)
N
阈值电压 VGS(th) 典型
1.7 V
导通电阻 RDS(ON)@10V 典型
1.6 mΩ
导通电阻 RDS(ON)@4.5V 典型
2.4 mΩ
导通电阻 RDS(ON)@4.5V 最大
3 mΩ
栅源电压 VGS 最大
±20 V
结温 Tj
150 °C
雪崩能量 EAS 最大
292 mJ
输入电容 Ciss 典型
2091 pF
输出电容 Coss 典型
1260 pF
反向传输电容 Crss 典型
45 pF
总栅极电荷 Qg 典型
30 nC
ESD
No
最小包装量
5000 pcs
最小订购量
50000 pcs
应用推荐-马达驱动
Y
应用推荐-高频电源
Y
应用推荐-通用开关
Y

封装与电路符号

SMT4002ALP 封装外形、引脚配置与电路符号图
封装外形 · 引脚配置 · 电路符号（源自中晶新源官方 datasheet）

在线规格书

以下内容整理自原厂规格书，实际参数以原厂正式文件为准。

SMT4002ALP

40V N-Channel Power MOSFET

Product Summary
V_DS R_DS(ON), max I_D, max
40 V 2.0 mΩ @ V_GS = 10V 170 A
3.0 mΩ @ V_GS = 4.5V

PDFN5060-8L

Ordering Information
Orderable Part Number Package Type Device Marking Form Quantity (pcs)
SMT4002ALP PDFN5060-8L 4002AL 13" Tape&Reel 5,000
Maximum Ratings (@ T_C = 25°C, unless otherwise specified.)
Parameter Symbol Value Unit
Drain - Source Voltage V_DS 40 V
Gate - Source Voltage V_GS ±20 V
Continuous Drain Current (V_GS = 10V) ^(1) I_D @ T_C = 25°C 170 A
I_D @ T_C = 100°C 107 A
Pulsed Drain Current ^(2) I_DM — A
Single Pulse Avalanche Current (L = 0.1mH) I_AS 42 A
Power Dissipation P_D @ T_C = 25°C 96 W
P_D @ T_C = 100°C 38 W
Junction & Storage Temperature Range T_J, T_STG -55 ~ +150 °C
Thermal Characteristics
Parameter Symbol Typ Max Unit
Thermal Resistance, Junction-to-Ambient ^(4) R_θJA 35 45 °C/W
Thermal Resistance, Junction-to-Case ^(5) R_θJC 1.0 1.3 °C/W

Electrical Characteristics (@ T_J = 25°C, unless otherwise specified.)

Off Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Drain-Source Breakdown Voltage V_(BR)DSS V_GS = 0V, I_D = 250µA 40 — — V
Zero Gate Voltage Drain Current I_DSS V_DS = 40V, V_GS = 0V — — 1.0 µA
T_J = 125°C — — 100 µA
Gate-Source Leakage Current I_GSS V_GS = ±20V, V_DS = 0V — — ±100 nA
On Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Gate Threshold Voltage V_GS(th) V_GS = V_DS, I_D = 250µA 1.2 1.7 2.5 V
Static Drain-Source On-Resistance R_DS(on) V_GS = 10V, I_D = 20A — 1.6 2.0 mΩ
V_GS = 4.5V, I_D = 15A — 2.4 3.0 mΩ
Forward Transconductance g_fs V_DS = 5.0V, I_D = 20A — 47 — S
Diode Forward Voltage V_SD I_S = 2.0A, V_GS = 0V — 0.7 1.2 V
Dynamic Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Input Capacitance C_iss — 2091 — pF
Output Capacitance C_oss V_DS = 20V, V_GS = 0V, f = 1MHz — 1260 — pF
Reverse Transfer Capacitance C_rss — 45 — pF
Gate Resistance R_g V_GS = 0V, V_DS = 0V, f = 1MHz — 1.7 — Ω
Switching Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Turn-On Delay Time t_d(on) — 3.6 — ns
Rise Time t_r V_GS = 10V, V_DS = 20V — 6.6 — ns
Turn-Off Delay Time t_d(off) I_D = 20A, R_GEN = 3.0Ω — 24 — ns
Fall Time t_f — 10 — ns
Gate Charge Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Total Gate Charge (V_GS = 10V) Q_g V_DS = 20V, I_D = 20A — 30 — nC
Total Gate Charge (V_GS = 4.5V) Q_g — 14.6 — nC
Gate-Source Charge Q_gs V_GS = 10V — 6.3 — nC
Gate-Drain Charge Q_gd — 4.1 — nC
Gate Plateau Voltage V_plateau — 3.0 — V
Drain-Source Diode Characteristics
Parameter Symbol Test Condition Min Typ Max Unit
Body Diode Reverse Recovery Time t_rr I_F = 20A, dI/dt = 100A/s — 39 — ns
Body Diode Reverse Recovery Charge Q_rr T_J = 25°C — 43 — nC
Diode Forward Current I_S T_C = 25°C — — 124 A

Notes:

  1. This current is chip limited, which is calculated based on R_θJC.
  2. This current is calculated on single pulse with 10µs Pulse & Duty Cycle = 1%.
  3. Device mounted on FR-4 substrate PC board with 2oz copper on 1inch square cooling area.
  4. Thermal resistance from junction to the exposed pad.
  5. Short duration pulse test used to minimize self-heating effect.
  6. Defined by design, not subject to production.
OX1S40N04T封装TO-252结构NOX1S5N04T封装SOT-23结构NOX1S60N04T封装TO-252结构NOX1S80N04T封装TO-252结构NOXS043N04A封装PDFN5×6-8L结构NSMN4007ALP封装PDFN5060-8L漏源电压 VDS40 V